How to Prevent Bike Tire Funk
How to Prevent Bike Tire Funk
Bond rips patches while dry
I will post about tire punk ~
Tire punk is an inevitable part even for the players.
If you know the enemy and know me, I will win the battle!
I'm a punk in six months ~ ~
I have magic know-how to make funk in 10 years.
Velotto tires will tell you ~
First of all,
Are you sure you are using it for your intended use?
(Those who are nervous for the moment)
At the price of ~
25C is good.
I am a superb bike so I will definitely use top quality tires ~!
You are not using it for reasons such as ~
Tires are a set of tires for each use.
Is there anyone who enjoys the land and the sky across the sea?
Oh, of course, the Velotto Phantom V2 model is available for land and sea ~!
I certified it.
For those of you who have been searching for tires for the purpose of the feature I posted last time
World's first ~!
On the homepage of the welltune with the tire search system
By choosing the right tire for your riding style
I want to show you more safety and higher performance ~
Punk is not from a tire but from a tube in it ~!
Blast furnace tube is thin rather than thin,
We also recommend Velotto Tube ~
And keep the tubes in place so they do not chew.
Repeatedly blowing in the wind and helping the tube to get a good hold ~
Sincerity is the fruit!
And we attach the tire to the direction of the thread of the bicycle ~
I do not know what this is, but when I finish wearing it,
I always check beforehand before settlement ~
And in the case of MTB, one more here ~!
The front and rear are also set, so check the front tires and rear tires!
And finally ~ I use rim tape of bicycle ~
As the left image shows, there are spoke holes in the rim.
It is recommended to cover the edge part with rim tape like the right image ^^
Velotto also has a yellow mini rim tape equipped with a Phantom Mini mini bell to reveal that it is equipped with ^^
Wow ~ ~
First of all,
You have been upgraded from punk to punk once every 6 months.
Choose the right tire for your application
You've got the correct mounting know-how.
Now, I'll give you a way to do a punk for 10 years with post management.
1. Clean the tires after riding ~!
There are countless foreign objects on the roads that ride.
If you do not wipe clean
The foreign matter continues to accumulate and accumulate, causing tire wear.
Mileage can shorten the life span more than can cause ~
After riding, simply wipe it with a wet tissue,
It is recommended to remove toothpick ~
If there is no luck, sand can get through the tire beads and impact the tube from inside the rim.
Please do not give it away, please wipe it thoroughly ^ ^
And even if you do not ride your bicycle in the early posting,
Do you remember posting to be oxidized?
Tires should be careful to keep them like this ~
If you get sunlight or heat, the tire will dry and crack ~
If you keep it like this, keep it in a place where there is no sunshine.
It is a way to store it firmly without punk ^^
2. Replace front and rear tires ~!
Basically, tire wear in riding
Due to the center of gravity of the person or the slip on the rear wheel
Do you know that rear tires wear faster than front tires?
Replacing the front tires and rear tires at moderately 2000 km to 1000 km intervals
It is a secret to use long without flatness to evenly adjust wear rate ~ !!
3. Check tire pressure!
If there is too much air pressure, the rim will go crazy and cause a puncture ~
BUT ~!
If the air pressure is too low, the tube may be chewed and punctured.
It's not easy, is it?
When you look at the tire, the effective Psi is displayed
For Velotto and Phantom Mini, 85 to 115 Psi is the right Psi
There are many people who put the highest number on the list,
It is not recommended to 115 that it can hold up to 115 until the last ~
It is only about 100, which is the middle of 85 ~ 115.
If you do this, you can safely prevent tire puncture ^ ^
Oh, yes.
You should not be angry when you pass this place and it is punctuated.
Because we are all learned. Do not blame me for doing this.
So, last time I had to puncture for the puncture in ~ 10 years
I will make the finish ^^
If you are a learned person, you should pack your funk patches, tools, pumps and Co2 whenever and wherever you like ~
Even if it is not me, let's keep each other for other people ^^
First of all, the tire was punk!
Brutally pulls out the tire ~
Then, as shown in the figure on the right, I put a wind in the tube and look for holes.
And I will change the surroundings with sandpaper like this ~
And around the perforated area wide and uniformly ~
Bonding is done ~
And 3 ~ 5 minutes .. enough ~ ~ Point to wait until you drink!
I do not want to get rid of it.
And boldly sticks ~ ~ not shaking ~ ~
I simply push with a heel of 60kg weight.
If the tires are torn, put a patch on the inside of the tire as you would on a tube.
It is enough to make a temporary arrangement even if you put it in paper money by first aid treatment.
댓글
댓글 쓰기