기본 콘텐츠로 건너뛰기

Riding a bike safely





Riding a bike safely

May ~
It's a good bike ride.
Bicycle roads have increased in number of cyclists
And accidents also increase.
Bicycle accident
Bicycle accident 2
 I also see the legs are broken every year and the arm is broken.
I learned how to ride a bicycle safely in an ignorant way.
And this year I vowed to target my bike without any accident.
Luckily, I did not have an accident, but I am writing this post because I have been riding my bike and have been treated for water on my knees and ankles.

Bicycle accident
Cycle tour accident
Riding a bicycle safely is not just about falling over or hitting somewhere.
It is true that the condition of the body also adjusts

"Ride the bike safely"

Please bear in mind that ~

Through this bellows, many riders
Without an accident experience, "bicycle safe way to ride" I want to be spread about
First of all, I will give you a summary of things you should know about bicycle safety.

1. Bicycle Traffic Law (Safety Education)!
2 Basic bike maintenance!
3. Bicycle safety regulations
4. Bicycle safety technology!


Let's look in order ~

Bicycle traffic laws and safety education first!
Looking at the accident photos, I feel comfortable with the board director.
Maybe it would have looked childish if I had seen it without an accident picture.
That's as safe as it always is.

Thinking after the accident is already too late, is not it?

Next is how to manage bicycle safety !!
It would be really dangerous if there was no break during the ride.

Always lock the lever down before running!
Bicycle brake lever check
Now that the brake lever is locked, check that the brake is working properly and that the brake is working properly!
Bicycle brake lever check 2
If your fingers are short, make sure that the brake levers are not too far apart.
Please check the urgent situation in preparation!

I've checked the wheels and brakes and I have to check if the wheels are well fitted.
QR Lever Check
Make sure that the QR levers on the front and rear wheels are properly locked.
Please lock it tightly with two fingers and check whether it is not loose ~
If I run out of wheels, I'll be terrible.
TIRE PSI Check
And the pressure of the wheels before the riding is moderate.

If you want to be a little smoother, I will always let you wind.

There is an effective PSI when you look at tires ~
The bellows I use are Phantom Mini 85 ~ 115 PSI
Then check it to keep it at the midpoint of 100 PSI.

Chain oil check
And always wipe the bicycle chain clean and oil the chain ^ ^
If you do not clean the chain all the time, the chain may be destroyed during riding on foreign objects
Please inform the general people that the bicycle is passing by during the riding ~
Speaking with mouth, be ashamed to buy a bicycle bell,
Please let me know in front of you ~
Punk set check
Finally, no matter how well maintenance is done, the variable can not be helped ^^
Always pack funk patches, bicycle tools and emergency food in your bike tool barrel.
Please help those who have passed by, even if it is not me.
The accident is not a joke!
Have we all learned it properly?

Now it's a riding practice.
If you have a proper safety training and bike maintenance,
I need skill to dehydrate ~

Sometimes I teach at a club, but in my personal opinion
It is recommended to refrain when you need to cause more accidents by riding on your hands.
First of all, I think the bike skills to ride safely ~

1. Make a sudden stop while driving at high speed ~ !!
 I watched Youtube and watched a sweat.
In case of emergency stop, remove the upper body to prevent the bicycle from turning upside down.
And a technology that prevents the rear wheels from slipping.
Standing is a bonus with the skills you really need in Heel River ^^


2. Next Overcoming obstacles
GCN Bicycle Technology
GCN Bicycle Technology
 There are times when we meet bikers, bikes, bikes, bikes, bumps, sewers,
It is a technique of lifting the rear wheel while holding the front wheel with the hand.
GCN Bicycle Technology
3. Next run slowly + slowly bend the curve
It seems to be easy, but there are a lot of people who can not surprise you ~
There are a lot of people who seem to be dangerous when they fall into a hanam or other narrow alley to go to Namsan.
If you do this, you should practice slowly in a spacious space without people
It is very useful when you go through a narrow alley ~

GCN Bicycle Technology
4. Next is the dreaded downhill (Down Hill)
On downhill, it is important to have enough deceleration and front sight ahead of the corner.
Be careful if the car is not on the opposite side of the corner.
It is important to go around the corner !!

댓글

이 블로그의 인기 게시물

Shimano Di2 Crash Mode Reset Guide for Frozen Shifting by Model Number

Shimano Di2 crash mode reset guide Shimano Di2 crash mode can make your bike feel completely dead after a fall, a rock strike, or even a hard knock in the garage. The shifter still clicks, but the rear derailleur stops moving. In many cases, that does not mean the derailleur is broken. It means the protection function has stepped in to protect the motor and linkage. If you want the short answer first, here it is. On many current 12-speed Shimano Di2 rear derailleurs, the reset is done by turning the crank and shifting toward the largest sprocket, then shifting back toward the smallest sprocket. On older wired Di2 systems, the reset often starts from the Junction A button. On the newest wireless gravel and MTB derailleurs, Shimano has moved to Automatic Impact Recovery, so the behavior is different from the old-style locked crash mode. What Shimano Di2 crash mode feels like The most common symptom is simple. The bike was shifting fine, then after an impact the rear shifting stopped....

시마노 2027 신형 로드슈즈·페달 총정리|SH-RC910·RC810·PD-R9300·SPD-SLR 차이

시마노 로드용 클릿슈즈와 페달이 꽤 큰 세대교체를 준비하고 있습니다. 처음에는 단순히 기존 S-PHYRE RC903 후속인 SH-RC910 과 DURA-ACE PD-R9100 후속 페달이 나오는 정도로 보였는데, 공개된 내용을 자세히 보면 이번 변화의 중심은 제품 이름이 아닙니다. 핵심은 오랫동안 시마노 로드 페달의 기준이었던 SPD-SL 이후 새로운 플랫폼인 SPD-SLR 입니다. 2026년 9월 현재 Shimano 공식 테스트 웹사이트에는 2027년형 SH-RC910 과 새로운 DURA-ACE PD-R9300 의 제품 페이지가 실제로 노출돼 있고 상당히 자세한 사양까지 확인할 수 있습니다. SHIMANO S-PHYRE 공식 브랜드 이미지|© SHIMANO 2027 시마노 로드슈즈·페달 핵심만 먼저 ✔ 신형 플래그십 슈즈 : SH-RC910 ✔ RC910 모델 연도 : 2027 ✔ RC910 강성지수 : 12 ✔ RC910 무게 : 233g / 사이즈 43 ✔ 신형 로드 플랫폼 : SPD-SLR ✔ 기존 SPD-SL도 RC910 슈즈 사양에 함께 표기 ✔ 새로운 라스트 : DYNALAST 2.0 ✔ 듀얼 BOA : Li2F ✔ 신형 DURA-ACE 페달 : PD-R9300 ✔ PD-R9300 무게 : 227g ✔ PD-R9300 스택 : 12.5mm ✔ 기본 클릿 : SPD-SLR CL-110 ✔ SH-RC810도 차세대 DYNALAST 2.0 호환목록에서 공식적으로 확인 SH-RC910·PD-R9300은 루머가 아니라 Shimano 공식 페이지에 있습니다 먼저 신제품 정보의 성격부터 구분할 필요가 있습니다. 인터넷 커뮤니티에서 나온 단순 예상 이미지나 “다음 듀라에이스는 아마 R9300일 것이다” 같은 추측과는 다릅니다. 현재 Shimano의 UAT 테스트 웹사이트에는 SH-RC910과 PD-R9300이 NEW 제품으로 등록 되어 있고, 모델명과 기술, 무게...

시마노 울테그라 기스 복원|레버·뒷드레일러 터치업 페인트 사용법

로드자전거를 오래 타면 프레임보다 먼저 상처가 생기는 부품이 있습니다. 바로 시마노 STI 레버와 뒷드레일러 입니다. 벽에 자전거를 세웠다가 살짝 넘어지거나 클릿을 빼지 못해 저속으로 넘어지는 정도만으로도 레버 끝이나 뒷드레일러 바깥쪽에 은색 기스가 생길 수 있습니다. 특히 Ultegra R8100이나 Dura-Ace R9200 처럼 가격이 높은 구동계라면 작동에는 전혀 문제가 없는데 작은 스크래치 하나 때문에 부품 전체를 교체하기도 아깝습니다. 이럴 때 알아두면 좋은 것이 Shimano 그룹셋 색상에 맞춰 제작된 터치업 페인트 입니다. 먼저 결론부터 ✔ 울테그라 레버 도장 벗겨짐 → 터치업 가능 ✔ 뒷드레일러 외측 긁힘 → 터치업 가능 ✔ 듀라에이스·105·GRX → 전용 색상 제품 있음 ✔ 깊은 상처는 색만 가려지고 표면 단차는 남을 수 있음 ✔ 낙차 후 변속불량이 있다면 도색보다 행어 점검이 먼저 ✔ 카본 크랙·부품 변형은 페인트로 가리면 안 됨 시마노 기스 복원용 Legend Wheels 터치업 페인트 이미지 출처 : Francesconi Bike / Legend Wheels 사진에 있는 제품은 Legend Wheels의 자전거 부품 전용 Touch-Up Paint 입니다. 여기서 한 가지 먼저 알고 있어야 합니다. Shimano가 직접 판매하는 시마노 정품 보수페인트는 아니며 , Legend Wheels가 Shimano 그룹셋별 표면 색상에 맞춰 개발한 서드파티 보수용 페인트입니다. Legend Wheels 공식 제품 설명을 보면 울테그라 R8100 12단용은 Anthracite Gray, 즉 짙은 회색 으로 만들어졌으며 레버와 앞드레일러, 뒷드레일러, 브레이크 캘리퍼의 작은 스크래치나 도장 벗겨짐을 보수하는 용도입니다. 용량은 10ml이고 뚜껑에 작은 붓이 붙어 있으며, 마감용 바니시가 페인트에 포함돼 있어 별도의 클리어코트를 다시 칠할 필요가 없는 방식입니다. ...